1. Gélinas C., Cros J., St-Louis A. “Use of Insulated Iron Powders in a Bicycle permanent Magnet Electric Motor”, PM2TEC 2004, Chicago, June 2004

2. David Boies, Michel Guillot, Pierre Carrier, Slim Bouassida and Tandjaoui Baazi, “Design Improvement of Die Filling Shoe”, PM2TEC 2004, Chicago, June 2004.

3. Bouassida, S., Guillot, M., Boies, D., Gakwaya, A., Baazi, T., Chtourou, H., « Study of Die Filling and Cold Pressing of Aluminum Alloys”, PM2TEC 2004, Chicago, June 2004 (conference only).

4. Chtourou, H., Guillot, M., Gakwaya, A., "Modeling of the Metal Powder Compaction Process Using the CAP Model. Part I. Experimental Material Characterization and Validation", International Journal of Solids and Structures, 29 (2002) p. 1059-1075.

5. Chtourou, H., Gakwaya, A., Guillot, M., "Modeling of the Metal Powder Compaction Process Using the CAP Model. Part II. Numerical Implementation and Practical Applications", International Journal of Solids and Structures, 39 (2002) p. 1077-1096.

6. Guillot, M., Pesant, M., Chtourou, H., "Study and Improvement of Die Filling Systems for Reducing Density Variations", International Conference PM2TEC 2002, Orlando, Florida.

7. Guillot, M., Gagné, M., "Study and Application of Electrical Resistivity and Other NDT Techniques For Flaw Detection in Powder Metal Parts", PM2TEC'2000, New York, June 2000.

8. Chtourou, H., Guillot, M., "A New Approach for Lowering the Risk of Cracking During the Compaction of P/M Components", PM2TEC'2000, New York, June 2000.

9. Gauvin, K, Guillot, M., Gakwaya, A., Pelletier, F., "A New Approach for Predicting the Tool Strength During Compaction", PM2TEC'2000, New York, June 2000.

10. VoVan, A., Guillot, M., "The Effect of Several Parameters On Part Distortion During Sintering", PM2TEC'1999, Vancouver, June 1999.

11. Pelletier, F., Guillot, M., VoVan, A., "Analysis and Simulation of the Kinematics of the Powder Compaction Process", PM2TEC'1999, Vancouver, June 1999.

12. Gakwaya, A., Chtourou, H., Guillot, M., "Theoretical and Practical Aspects of Metal Powder Compaction Process", Integrated Design and Manufacturing in Mechanical Engineering '98, edit. JL Batoz et al., Kluwer Academic Publishers, Rotterdam, pp. 283-290.

13. Chtourou, H., Guillot, M., Gakwaya, A., et Dammak, F., Using Finite Element Simulation to Assess the Effects of Compaction Sequence Variation and Special Geometric Features on the Final Compact Density, Proc. of the international conference on PM2TEC'97, Chicago, juin 1997.

14. Vo Van, A., Guillot, M., Chtourou, H., et Gakwaya, A., A Simplified Approach to Predicting Dimensionnal Changes During Sintering Using Finite Element Analysis, International Conference on Powder Metallurgy and Particulate Materials , Chicago, june 1997.

15. Pelletier, F., Chtourou H., Guillot, M., “On the monitoring of Tool Motion an dits Effects on the Quality of Complex P/M Parts”, PM2TEC’97, Chicago, USA 1997

16. Chtourou H., Pelletier, F., Guillot, M., « Simulation Approach for Minimizing the Risk of Cracking in P/M compacts, PM2TEC’97, Chicago USA, 1997

17. Desrosiers, L., Nigarura, S., “New High Performance Tungsten/Copper Composite for Electrical Contacts, PM2TEC’97, Chicago, USA, 1997

18. Chtourou H., Guillot M., “Generalization of the Vickers Hardness Local Density Measurements Technique to Different Powder Materials, PM2TEC’1996, Washington USA 1996

19. Chtourou H., Gakwaya A., “Finite Element Simulation of the Rigid Die Compaction of Metal Powder Components”, PMTEC2’96, Washington 1996

20. Genest C., Fournier E., “The Effect of Sintering on Part Dimensional Variations”, PM2TEC’96, Washington USA 1996

21. Chtourou, H., Genest C., “Assessing the Dimensional Variations of the Compaction Process”, PM2TEC’96, Washington USA, 1996

22. Chtourou H., Gakwaya A., “Implementing a Cap Material Model for the Simulation of Metal Powder Compaction”, ASME Canadian Congress, 1995

23. Chtourou H., Parent S., “Local Density Measurements in Green and Sintered 316L SS Powder Compacts”, PM2TEC’95, Seattle, USA 1995

24. Chtourou H., Guillot M. “Modeling the Rigid Die Compacting of 316L SS Powder”, PM2TEC’95, Seattle, USA 1995

25. Desrosiers L., Nigarura S., “Use of P/M Technology in the Electrical Industry – Present Status and Future Trends”, Proceedings of the 41st Holm Conference, IEEE, October 2-4, 1995

26. Angers, R., Tremblay A., “Rotating Disk Coating for Centrifugal Atomization of Aluminum and Magnesium”, Canadian Metallurgical Quarterly, Vol.35, no.3, pp. 291, 1996

27. Lemieux P., Angers R., “Magnetic Properties of Fe-P-Sn and Fe-Sn Alloys”, PM2TEC’94, Toronto Canada, 1994

28. Ouellet D., Guillot M., “High Cycle Fatigue of Sintered 316L SS”, PM2TEC’94, Toronto Canada, 1994

29. Ouellet D., Guillot M., “Finite Element Analysis of Powder Metal Products”, PM2TEC’94, Toronto Canada, 1994

30. Tremblay A., Angers R., “Corrosion Resistance of 316L P/M SS”, PM2TEC’94, Toronto Canada, 1994

31. Desrosiers L., Guillot M., “Integrated Computer-Aided Design and Analysis of Powder Metal Products and Processes”, PM2TEC’93, Nashville USA 1993